For assembly, this sensor (shown above) requires a minor modification described in the instructions. This sensor already has 3 useable mounting holes. This sensor is engineered with a dual channel flow through design to optimize flow, allowing flexibility for use in Feed OR Return lines. Ethanol fuel systems to determine ethanol content. NOTE: This sensor is the same found in the Haltech HT-011000 kit Motion Raceworks In Line Flex Fuel Sensor Mount for use with E85 or. For these reasons it is also a great option for E85 and Ethanol fuels as well as Methanol. This makes it an excellent option for corrosive fuel, as well as power steering lines, turbo oil lines, etc. This sensor already has 3 useable mounting holes. PTFE is much harder to assemble but longevity wise it is not prone to temperature and pressure. NOTE: This sensor is the same found in AEM 30-2200 / 30-2201, ECU Master WHP, Max圎CU 1282, Fuel Tech 5005100353 / 5011100354, and Cobb Tuning kits.Ĭompatible with included mount (shown below). The Radium Engineering Split-Flow Flex Fuel Adapter was designed to be compatible with multiple sensors, as described below. Unique 10AN ORB end port adapter fittings can be purchased HERE. This is great for proper spacing with surrounding components. Two M6x1.0mm socket head bolts are provided for mounting.Īdditionally, the position of the sensor can be rotated at any given time even when mounted and plumbed. However, the Radium Split-Flow Flex Fuel Sensor Adapter is less complicated, considerably compact, and provides a mounting solution for the popular GM 13577429 flex fuel sensor (shown below). Traditionally this additional flow path could be accomplished with hose and y-adapter fittings. Because the flex fuel sensor is directly inline with the fuel flow path, it will read the incoming ethanol content at high and low engine demands. In this case, expect to see up to a ~10psi pressure drop if multiple pumps are used with a high-powered engine.Īs shown above, the Radium Engineering adapter splits the fuel flow into an auxiliary passage parallel to the sensor. But for improved accuracy and faster response times, the sensor should be plumbed upstream of the fuel injectors in the feed line. Flex fuel sensors measure ethanol content.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |